-
A relatively smooth and even surface
with no sharp objects. The bench or ground can be sloping but must be
even. -
A piece of Ebb & Flow Mat of the
desired width, cut to length. -
One header pack per mat.
-
One filter/pressure reducer/pressure
gauge unit. Click here for photo -
An electronic irrigation timer and
solenoid/s. -
A water supply. (12 psi is the
required pressure, and a flow rate of 30L/min per 100LM (7USg/Min).
Anything below this can result in poor performance. (Note: If the water is
too dirty, you will have to clean your filter more often to ensure proper
performance.)
