KISSS Irrigation systems all use standard Drip Tubes or Drip Tapes manfactured
by recognised irrigation manufacturers.
The most commonly used are Netafim and/or Toro - each roll of KISSS product
should be clearly marked.
The fittings (i.e. starters, joiners, tees, elbows, grommets) are all specific to both
product make (i.e. Netafim / Toro), as well as a product type (i.e. Drip Tube or
Drip Tape), as well as drip tube/tape diameter sizes and wall thicknesses.
IT IS ESSENTIAL THAT CORRECT FITTINGS ARE USED OTHERWISE THE
ASSEMBLED IRRIGATION SYSTEM WILL ALMOST CERTAINLY LEAK.
We advice use of experienced plumbers/irrigation installation specialists who should
be familiar with fittings and all other aspects of an irrigation system install.
Refer to the appropriate manufacturer by clicking onto the below Links.
The accompanying KISSS manual is general in nature does not purport to have the best nor complete
advice required for a succesful installation. The KISSS manual is intended to assist with general knowledge
to gain an insight & understanding as to how KISSS products may be used for irrigation purposes.
To veiw the KISSS manual please tick the following box, acknowledging that your
primary advice & sources of information are from an Irrigation Specialist and/or
the appropriate Manufacturer of the base Drip Tube / Tape.
